The Effect of Peptizing Agent Concentration on Processing and Properties of Alumina Based Catalyst Support

Authors : Servet Turan, Irmak Su Ökten, Cem Aciksari, Serdar Çelebi, Umut Savacı, Erhan Ayas

Pages : 304-313

Doi:10.16984/saufenbilder.1323558

View : 143 | Download : 146

Publication Date : 2024-04-30

Article Type : Research Paper

Abstract :Gamma alumina (γ-Al2O3) has drawn attention as a support material for heterogeneous catalysts extensively used in the oil and gas industry due to its superior properties. Boehmite (AlOOH) is an industrially accepted and well-known precursor to produce gamma alumina-based support. The process additions such as nitric acid (HNO3) are commonly used in shaping process of alumina to control textural, mechanical and structural properties of final catalyst support. In this work, gamma alumina precursor boehmite was peptized by nitric acid at molar ratio of HNO3/AlOOH ranging from 0 to 0.054. With addition of nitric acid, extrusion paste showed higher plasticity up to 0.017 mole of HNO3/AlOOH. The addition of more than this point led to an inhomogenity of extrusion paste caused by hard and brittle structure caused by the formation of aluminum nitrate salts. Also, higher mechanical strength was observed for samples peptized with lower nitric acid concentration because of effective deagglomeration by peptization. The pore size of catalyst support pellets increased up to an acid/ boehmite molar ratio of 0.017 by peptizing of boehmite. However, beyond this point pore size decreased due to dissolution of boehmite.
Keywords : Catalyst Support, Gamma Alumina, Peptizing, Extrusion