Comparison of T-Type Converter and NPC for the Wind Turbine Based on Doubly-Fed Induction Generator

Home Page
About
Submit A Journal
Submit A Conference
Submit Paper/Book
- Submit a Preprint
- Submit a Book
Contact

Balkan Journal of Electrical and Computer Engineering
Volume:9 Issue:2
Comparison of T-Type Converter and NPC for the Wind Turbine Based on Doubly-Fed Induction Generator

Comparison of T-Type Converter and NPC for the Wind Turbine Based on Doubly-Fed Induction Generator

Pages : 123-128

View : 63 | Download : 10

Publication Date : 2021-04-30

Article Type : Research Paper

Abstract :A three-phase T-type converter topology proposes for wind turbine based on doubly fed induction generator insert ignore into journalissuearticles values(DFIG);. The proposed converter consists of only twelve power switches without flying capacitors or any clamping diodes. The proposed system is implemented to grid side converter of wind turbine. Fuzzy logic controllers are more widely used in wind turbines compared to traditional control systems. Fuzzy logic PI controller has been applied to T-type and the conventional neutral-point clamped insert ignore into journalissuearticles values(NPC); converters control circuits. Total harmonic distortion insert ignore into journalissuearticles values(THD); value of current of presented system is measured as 1.76%. Also, DC-link voltage utilization can be maintained. Comparisons are conducted with T- type converter and a 3L-NPC); method under same operation conditions. The proposed scheme has been carried out to verify in simulation results.
Keywords : T type converter topology, Doubly fed induction generator, Wind turbine

ORIGINAL ARTICLE URL

* There may have been changes in the journal, article,conference, book, preprint etc. informations. Therefore, it would be appropriate to follow the information on the official page of the source. The information here is shared for informational purposes. IAD is not responsible for incorrect or missing information.