The Use of Data Transmission Technique Via Power Line Communication

Home Page
About
Submit A Journal
Submit A Conference
Submit Paper/Book
- Submit a Preprint
- Submit a Book
Contact

Balkan Journal of Electrical and Computer Engineering
Cilt: 12 Sayı: 2
The Use of Data Transmission Technique Via Power Line Communication

The Use of Data Transmission Technique Via Power Line Communication

Authors : Murat Şen, Seda Üstün Ercan

Pages : 144-151

Doi:10.17694/bajece.1432481

View : 90 | Download : 125

Publication Date : 2024-08-30

Article Type : Research Paper

Abstract :The smart grid requires the use of communication methods. One of these communication methods is power line communication (PLC). In this study, TMDSPLCKITV4 evaluation boards are programmed with the G3-PLC standard and operated as transmitter and receiver in low voltage distribution grid. Then, the distances between the transceiver points, the load characteristics were changed and the received signal strength indication, signal noise ratio, bit error rate and package error rate values for each modulation type of the G3-PLC standard were measured in real time. According to these measured values, the success of the PLC has been demonstrated. In general, it is observed that the number of erroneous data bits increases in each modulation type under pulsed variable load. Robust mod and binary phase shift keying modulation types appear to be the most successful modulation types with the least number of erroneous data bits when all experimental conditions are considered.
Keywords : Smart grid, power line communication, modulation, TMDSPLCKITV4, G3-PLC

ORIGINAL ARTICLE URL

* There may have been changes in the journal, article,conference, book, preprint etc. informations. Therefore, it would be appropriate to follow the information on the official page of the source. The information here is shared for informational purposes. IAD is not responsible for incorrect or missing information.