PRODUCTION OF CURVED SURFACE COMPOSITES REINFORCED WITH RUBBER LAYER

Authors : Mustafa ALBAYRAK, Mete Onur KAMAN

Pages : 19-22

View : 30 | Download : 11

Publication Date : 2021-06-01

Article Type : Research Paper

Abstract :In this study, laminated composites reinforced with rubber layers were produced under vacuum infusion method for different curved surface geometries. For this purpose, EPDM rubber interlayers, known for their impact-absorbing feature, were laid on curved-surface metal molds processed on computer numerical control insert ignore into journalissuearticles values(CNC); benches together with woven glass fiber woven fabrics and sandwich plates were obtained by vacuum infusion method. It has been evaluated how the interface adhesion properties of the structure, which is formed by combining different types of materials under vacuum, depending on the temperature curing. For this reason, composites were produced by curing under high temperature and room temperature. As a result, it was determined that in composites produced by curing at room temperature, separation occurred between layers and the desired interface toughness could not be achieved. However, no delamination defects were observed in the structure of sandwich plates obtained for 100 ° C curing, and it was observed that the adhesion tendency of rubbers with hyper-elastic material structure increased with temperature. A good harmony was achieved between fabrics and rubbers with the effect of temperature together with vacuum and very smooth geometries were obtained
Keywords : Glass fiber, EPDM Rubber, Vacum infusion, Curing, Delamination