Determining Pull-Out Deformations by Means of an Online Photogrammetry Monitoring System

Authors : Emin Özgür Avşar, Mehmet Orhan Altan, Ünal Anıl Doğan, Devrim Akça

Pages : 54-61

Doi:10.30897/ijegeo.302758

View : 13 | Download : 12

Publication Date : 2015-03-02

Article Type : Research Paper

Abstract :hemical anchorages are applied in many engineering implementations, particularly strengthening of reinforced concrete structures. During strengthening procedure; chemical anchorages should be tested, since they supply to transfer the load between existing construction elements and newly added elements. Therefore; the study of the quality of chemical anchorages is an important issue in construction materials science. In this context; the most important experiment is to determine the pull-out loads of embedded anchorage reinforcement by applying axial loads. In this study; it is aimed to determine the displacements of steel reinforcements, embedded into concrete by using chemical anchorages, while applying axial pulling loads. In order to determine the displacements and load - deformation graphs; starting conditions and every 10 bar pressure applied conditions of the steel reinforcements were captured by the cameras. The obtained images were evaluated by using photogrammetric software. Based on the photogrammetric post-processing results, the load - deformation graphs were plotted and the loads at loss of adhesion were determined.
Keywords : Acquisition, Monitoring, Engineering, Measurement, Camera, Photogrammetry