Gating System Design For 0.67hp Gasoline Generator Piston

Home Page
About
Submit A Journal
Submit A Conference
Submit Paper/Book
- Submit a Preprint
- Submit a Book
Contact

International Journal of Engineering Science and Application
Volume:4 Issue:2
Gating System Design For 0.67hp Gasoline Generator Piston

Gating System Design For 0.67hp Gasoline Generator Piston

Authors : Blessıng Ngozı Goodluck ALIEMEKE, M OLADEİNDE

Pages : 59-64

View : 95 | Download : 22

Publication Date : 2020-06-30

Article Type : Research Paper

Abstract :The design of gating system is key in the production of various engine components. It serves as basis for determining quantity of materials to be used in the manufacture of components during sand casting. The 0.67Hp gasoline generator piston designed to withstand stress and temperature conditions that the generator will be subjected to during operation was manufactured from the assemblage of gating system components. In order to produce effective generator piston the gating system design parameters such as weight of casting, thickness of casting, pattern length, runner size, sprue size and pouring time were designed to be 0.128kg, 4.805mm, 54.86mm, 492.31mm2, 122mm2 and 11.88s respectively. The gating system calculations were used to produce wood pattern, sprue size, runners and mould cavity. From the result obtained it showed that the developed piston was devoid of casting defects. The experimental generator piston produced from the application of the gating system worked effectively in a 0.67Hp generator set. Keywords: Gating system design, engine, casting and sandcasting
Keywords : gating system design, engine, sandcasting

ORIGINAL ARTICLE URL

* There may have been changes in the journal, article,conference, book, preprint etc. informations. Therefore, it would be appropriate to follow the information on the official page of the source. The information here is shared for informational purposes. IAD is not responsible for incorrect or missing information.