Biomass fast pyrolysis energy balance of a 1kg/h test rig

Authors : Konstantinos ATSONİOS, Kyriakos PANOPOULOS, Anthony BRİDGWATER, Emmanuel KAKARAS

Pages : 267-275

Doi:10.5541/ijot.5000147483

View : 13 | Download : 15

Publication Date : 2015-10-15

Article Type : Research Paper

Abstract :The present paper offers a methodological approach towards the estimation and definition of enthalpies constituting an energy balance around a fast pyrolysis experiment conducted in a laboratory scale fluid bed with a capacity of 1 kg h-1 operating with pure N2 as fluidization medium at atmospheric pressures and temperatures ~ 500oC. An effort was made to achieve a satisfying 92.5% retrieval of products insert ignore into journalissuearticles values(dry basis mass balance); with the differences mainly attributed to loss of some bio-oil constituents into the quenching medium, ISOPARTM. The chemical enthalpy recovery for bio-oil, char and permanent gases is calculated 64.6%, 14.5% and 7.1%, respectively. All the energy losses from the experimental unit into the environment, namely the pyrolyser, cooling unit etc. are discussed and compared to the heat of fast pyrolysis that was calculated at 1123.5 kJ per kg of beech wood. This only represents 2.4% of the biomass total enthalpy or 6.5% its HHV basis. For the estimation of some important thermo-physical properties such as heat capacity and density, it was found that using data based on the identified compounds from the GC/MS analysis is very close to the reference values despite the small fraction of the bio-oil components detected. The methodology and results can help as a starting point for the proper design of fast pyrolysis experiments, pilot and/or industrial scale plants.
Keywords : Bio oil, fast pyrolysis, beech wood, energy balance