Effects of Flow Parameters on Heat Transfer and Temperature Distribution of a Thermoelectric Module

Authors : Furkan KILIÇ, Enes KILINÇ

Pages : 331-337

Doi:10.7240/jeps.1257560

View : 107 | Download : 45

Publication Date : 2023-09-30

Article Type : Research Paper

Abstract :The effects of the hot air inlet velocity and hot air inlet temperature on the hot side temperature, the temperature difference between the hot and cold sides, and the heat transfer rate on the hot side of a thermoelectric module insert ignore into journalissuearticles values(TEM); were investigated by computational fluid dynamics insert ignore into journalissuearticles values(CFD); analyzes. As a result of CFD analysis, the maximum hot side temperature, the temperature difference between the hot and cold sides, and the average heat transfer rate on the hot side of the TEM are found to be 274.9 °C, 70.4 °C, and 33.8 W, respectively, at 15 m/s of hot air inlet velocity. Besides, the maximum hot side temperature, the temperature difference between the hot and cold sides, and the average heat transfer rate on the hot side of the TEM are determined to be 432.8 °C, 114.9 °C, and 55.1 W, respectively, for 800 °C of hot air inlet temperature at 15 m/s of hot air inlet velocity. As a result, increasing the hot air inlet velocity and inlet temperature increases the hot side temperature, the temperature difference between the hot and cold sides, and the heat transfer rate on the hot side of the TEM.
Keywords : Termoelektrik, termoelektrik güç üretimi, ısı transferi, sıcaklık dağılımı, HAD