Effect of hBN on Response Times of PEO-Based Electrochromic Devices

Home Page
About
Submit A Journal
Submit A Conference
Submit Paper/Book
- Submit a Preprint
- Submit a Book
Contact

Journal of the Turkish Chemical Society Section B: Engineering
Volume:7 Issue:1
Effect of hBN on Response Times of PEO-Based Electrochromic Devices

Effect of hBN on Response Times of PEO-Based Electrochromic Devices

Authors : Özge Akpınar Sarıhan, Ibrahim Inanç, Gediz Uğuz

Pages : 69-76

Doi:10.58692/jotcsb.1435022

View : 141 | Download : 53

Publication Date : 2024-04-01

Article Type : Research Paper

Abstract :In this study, all solid state electrochromic devices (ECDs) without plasticizer such as propylene carbonate were fabricated by sol-gel spin coating method. WO3 nanoparticles and PEO based polymer electrolyte solutions with hBN and without hBN nanoparticles were prepared. These solutions were sol-gel spin- and dip-coated on ITO-glass, respectively. For determining the effect of hBN nanoparticles, four configuration of ECDs were fabricated. The fast bleaching and coloring times of fabricated ECDs were obtained with hBN nanoparticles in WO3 and PEO based polymer electrolyte thin films as 1.15 seconds. Glass/ITO/hBN-WO3/hBN-PEO-based-polymer electrolyte/ITO/Glass electrochromic device is turned on and off 60 times. After 60 cycle, the device coloring time changed to 2-3 seconds, bleaching times changed to 30 seconds.
Keywords : electrochromic devices, polymer electrolyte, sol gel process, hBN nanoparticles

ORIGINAL ARTICLE URL

* There may have been changes in the journal, article,conference, book, preprint etc. informations. Therefore, it would be appropriate to follow the information on the official page of the source. The information here is shared for informational purposes. IAD is not responsible for incorrect or missing information.