USING FIRED WALL TILE’S SCRAPS IN FLOOR TILE BODY

Home Page
About
Submit A Journal
Submit A Conference
Submit Paper/Book
- Submit a Preprint
- Submit a Book
Contact

Journal of Scientific Perspectives
Volume:3 Issue:2
USING FIRED WALL TILE’S SCRAPS IN FLOOR TILE BODY

USING FIRED WALL TILE’S SCRAPS IN FLOOR TILE BODY

Pages : 133-140

View : 11 | Download : 7

Publication Date : 2019-04-30

Article Type : Research Paper

Abstract :The effect of the addition of the fired wall tile’s scraps in floor tile body was studied. The fired wall tile’s scraps were added to floor tile body according to 1.96-5.66-10.71-17.85 wt. % ratios. The sintering behavior of the floor tile was evaluated by measuring the water absorption, fired shrinkage, dry shrinkage and fired strength. In addition, microstructure and phase analysis were investigated by scanning electron microscopy insert ignore into journalissuearticles values(SEM);, energy dispersive x-ray insert ignore into journalissuearticles values(EDX); and x-ray analysis insert ignore into journalissuearticles values(XRD);. Firing was carried out at 1189 0C for 40 min. in industrial type continuous kiln. It is seen that the addition of 5.66 wt. % of the wall tile’s scrap to the floor tile increases the fired strength value. In the XRD analysis, anorthite phase was observed which shows fired strength and chemical resistance.
Keywords : Fired scraps wall tiles, Floor tiles, Environment savings, Cost of product

ORIGINAL ARTICLE URL

VIEW PAPER (PDF)

* There may have been changes in the journal, article,conference, book, preprint etc. informations. Therefore, it would be appropriate to follow the information on the official page of the source. The information here is shared for informational purposes. IAD is not responsible for incorrect or missing information.