Determination of the CO2 Laser Parameters on Dimple Geometry on Al2O3 Ceramic Surface

Home Page
About
Submit A Journal
Submit A Conference
Submit Paper/Book
- Submit a Preprint
- Submit a Book
Contact

Natural and Applied Sciences Journal
Volume:6 Issue:2
Determination of the CO2 Laser Parameters on Dimple Geometry on Al2O3 Ceramic Surface

Determination of the CO2 Laser Parameters on Dimple Geometry on Al2O3 Ceramic Surface

Authors : Çağla Pilavci, Yasemin Tabak, Satılmış Ürgün, Timur Canel

Pages : 49-60

Doi:10.38061/idunas.1363477

View : 95 | Download : 83

Publication Date : 2023-12-30

Article Type : Research Paper

Abstract :Dimples on Al2O3 ceramic plates were created with a CO2 laser using different laser parameters. The effects of the laser parameters used on the dimple geometry were investigated and the necessary laser parameters were optimized to obtain the desired dimple geometry. Taguchi method was used in the optimization process. The effects of laser power, scan speed and laser frequency from laser parameters were investigated. Optimum laser parameters were determined as a result of the Taguchi Optimization method. In addition, the laser parameter with the highest effect on the result was determined. Optimum laser parameters were obtained as 60 W for laser power, 35 s for laser exposure duration and 50 kHz for laser frequency.
Keywords : Al2O3, Ceramics, Optimization, Laser texturing, Laser parameters

ORIGINAL ARTICLE URL

* There may have been changes in the journal, article,conference, book, preprint etc. informations. Therefore, it would be appropriate to follow the information on the official page of the source. The information here is shared for informational purposes. IAD is not responsible for incorrect or missing information.