THE EFFECT OF ADHESIVE TYPE AND REINFORCEMENT TYPE ON FLEXURAL DEFORMATION OF BENDING LVL

Authors : İlkay ATAR, Fatih MENGELOĞLU

Pages : 110-122

View : 37 | Download : 13

Publication Date : 2023-04-30

Article Type : Research Paper

Abstract :In this study, the effect of reinforcement type and glue type on the amount of flexural deformation of reinforced bending LVLs was investigated. Within the scope of the study, 2.2mm peeled poplar veneer and 1.5mm peeled alder veneer were used as wood material. Glass fiber and basalt fabric insert ignore into journalissuearticles values(200g/m²); were used as reinforcement. Alder veneer was used on the lower and upper surfaces, and poplar veneer was used on the middle layers. Reinforcement material was applied to the convex surface of the bending LVL. A total of 7 different combinations of bending LVLs in the form of chair leg-armrest were produced. Flexural test, tensile test and ANSYS analysis were performed on the produced LVLs. According to the test results, it was determined that there was a decrease in flexural deformation with the use of reinforcement. It was determined that the best results were obtained with the use of glass fiber and epoxy. In addition, ANSYS results and real test results were found to be similar.
Keywords : Bükme tabakalı kaplama kereste, ANSYS, epoksi, cam elyafı, mekanik özellikler

ORIGINAL ARTICLE URL