Characterization of Borided DIN X165CrMoV12 Steel

Home Page
About
Submit A Journal
Submit A Conference
Submit Paper/Book
- Submit a Preprint
- Submit a Book
Contact

El-Cezeri
Volume:5 Issue:3
Characterization of Borided DIN X165CrMoV12 Steel

Characterization of Borided DIN X165CrMoV12 Steel

Pages : 904-908

View : 19 | Download : 5

Publication Date : 2018-09-30

Article Type : Research Paper

Abstract :In the present study, characterization properties of borides formed on DIN X165CrMoV12 steel have been investigated. Boriding was performed in a solid medium consisting of Ekabor-II powders at 1073 and 1273K for 4 h. The boride layer was characterized by optical microscopy, X-ray diffraction technique and the micro-Vickers hardness tester. X-ray diffraction analysis of boride layers on the surface of the steels revealed the existence of FexBy and CrxBy compounds. Depending on the chemical composition of substrates, the boride layer thickness on the surface of the DIN X165CrMoV12 steel was found to be 32.75 μm and 78.92 μm at 1073 and 1173K for 4 h, respectively. The hardness of the boride compounds formed on the surface of the DIN X165CrMoV12 steel ranged from 1638 to 1892 HV 0,1 , whereas Vickers hardness values of the untreated steel DIN X165CrMoV12 was 432 HV0,1.
Keywords : DIN X165CrMoV12, Boriding, XRD, Micro hardness

ORIGINAL ARTICLE URL

VIEW PAPER (PDF)

* There may have been changes in the journal, article,conference, book, preprint etc. informations. Therefore, it would be appropriate to follow the information on the official page of the source. The information here is shared for informational purposes. IAD is not responsible for incorrect or missing information.