IAD Index of Academic Documents
  • Home Page
  • About
    • About Izmir Academy Association
    • About IAD Index
    • IAD Team
    • IAD Logos and Links
    • Policies
    • Contact
  • Submit A Journal
  • Submit A Conference
  • Submit Paper/Book
    • Submit a Preprint
    • Submit a Book
  • Contact
  • El-Cezeri
  • Volume:6 Issue:1
  • Friction and Wear Properties of T6 Treatment And As-Plated Duplex NiP/NiB Coatings on Az91d Magnesiu...

Friction and Wear Properties of T6 Treatment And As-Plated Duplex NiP/NiB Coatings on Az91d Magnesium Alloy

Authors : Kübra UÇAR, Uğur ŞEN
Pages : 31-42
Doi:10.31202/ecjse.450204
View : 25 | Download : 8
Publication Date : 2019-01-31
Article Type : Other Papers
Abstract :Electroless nickel coatings can be    preferred in wear resistant applications like firearms with good lubricity properties. In this study, a widely-used magnesium alloy, AZ91D both as-cast and precipitation-hardened conditions were coated with nickel phosphorus/nickel boron duplex coatings by the electroless deposition method. Solution treatment insert ignore into journalissuearticles values(W); of the alloy was carried out at 415 °C for 22 h in carbon powder followed by water quenched at 25 °C. Aging treatment insert ignore into journalissuearticles values(T6); of the solution-treated samples was performed at 216 °C for 6 h. The microstructures, elemental distributions and phase analysis of the obtained coatings were characterized by scanning electron microscopy insert ignore into journalissuearticles values(SEM);, energy dispersive X-ray spectrometry insert ignore into journalissuearticles values(EDS); and X-ray diffraction insert ignore into journalissuearticles values(XRD); analysis. According to the XRD analysis, the obtained coatings have an amorphous character and subsequent to this, a crystallization process to the sample is carried out at 350 °C. The friction and wear properties of the coating are studied by means of ball-on-disc experiments at room temperature under 10N applied loads at 0.1 m/s sliding speed using alumina balls as counterparts. The friction coefficient of the sample was compared with each other from friction coefficient-distance graphics. The wear rates were determined by measuring the depth of the track with an 3D-optical microscope insert ignore into journalissuearticles values(3D-OM);. Characterization of the wear tracks was performed by SEM and EDS.
Keywords : Electroless nickel coatings, Wear, AZ91D

ORIGINAL ARTICLE URL

* There may have been changes in the journal, article,conference, book, preprint etc. informations. Therefore, it would be appropriate to follow the information on the official page of the source. The information here is shared for informational purposes. IAD is not responsible for incorrect or missing information.


Index of Academic Documents
İzmir Academy Association
CopyRight © 2023-2026