A STUDY ON THE PROCESS PARAMETERS OF DISCHARGE PRINTING OF COTTON FABRICS

Home Page
About
Submit A Journal
Submit A Conference
Submit Paper/Book
- Submit a Preprint
- Submit a Book
Contact

Tekstil ve Konfeksiyon
Volume:21 Issue:4
A STUDY ON THE PROCESS PARAMETERS OF DISCHARGE PRINTING OF COTTON FABRICS

A STUDY ON THE PROCESS PARAMETERS OF DISCHARGE PRINTING OF COTTON FABRICS

Authors : Arzu Yavaş, Arif Özgüney, Ahmet Çay, Burçin Eser

Pages : 349-355

View : 52 | Download : 39

Publication Date : 2011-12-30

Article Type : Research Paper

Abstract :Discharge printing of cotton fabrics with sodium- and zinc formaldehyde sulphoxylate with different fixation conditions was discussed in this study. Superheated steam, saturated steam and thermofixation were used for fixation processes. It was observed that steam based fixations resulted in the higher discharging effects, while thermofixation lead to an inadequate effect even in higher temperatures. Superheated steam was found to be advantageous in terms of lower fixation times. Sodium formaldehyde sulphoxylate gave superior discharging effects compared with zinc formaldehyde sulphoxylate, which caused higher strength loss especially in superheated steam fixation. Furthermore, the effects of the softeners on the discharge printing results were also investigated in the scope of the study.
Keywords : Discharge printing, Fixation, Strength loss, Softeners

ORIGINAL ARTICLE URL

* There may have been changes in the journal, article,conference, book, preprint etc. informations. Therefore, it would be appropriate to follow the information on the official page of the source. The information here is shared for informational purposes. IAD is not responsible for incorrect or missing information.