BENDING PROPERTIES OF 3D I-SHAPED WOVEN COMPOSITES

Home Page
About
Submit A Journal
Submit A Conference
Submit Paper/Book
- Submit a Preprint
- Submit a Book
Contact

Tekstil ve Konfeksiyon
Volume:30 Issue:1
BENDING PROPERTIES OF 3D I-SHAPED WOVEN COMPOSITES

BENDING PROPERTIES OF 3D I-SHAPED WOVEN COMPOSITES

Authors : Lvlihua LVLİHUA, Wang JINGJING, Huang YAOLI, Qianyong FANG, Ye FANG

Pages : 35-41

Doi:10.32710/tekstilvekonfeksiyon.570874

View : 42 | Download : 10

Publication Date : 2020-03-25

Article Type : Research Paper

Abstract :This paper deals w ith the bending properties of 3D insert ignore into journalissuearticles values(three-dimensional); basalt reinforced I-shaped woven composites with epoxy vinyl resin. T he 3D I-shaped woven fabrics with three different heights were fabricated on ordinary loom by reasonable design with low cost. The 3D I-shaped woven composites were fabricated by VARTM （ vacuum assisted resin transfer molding ） process. T he bending tests were conducted on a microcomputer control universal testing machine insert ignore into journalissuearticles values(TH-8102S);. The Load-displacement and energy-displacement scatter plots were obtained from experimental test s . The result showed that the polynomial fitting formula can be obtained by the calculation of least square method in the software of origin 8.0. Through the analysis of the mathematical equation and correlation coefficient of load-displacement and energy-displacement relationship, it could be seen that the fitting effect of the curve was better. T his mathematical equation of this method can be used to predict the relationship between load, energy and displacement.
Keywords : 3D woven fabric, I shaped composite, Mathematical equation, Bending properties

ORIGINAL ARTICLE URL

* There may have been changes in the journal, article,conference, book, preprint etc. informations. Therefore, it would be appropriate to follow the information on the official page of the source. The information here is shared for informational purposes. IAD is not responsible for incorrect or missing information.