Statistical analysis of mechanical properties of waste glass powder substituted glass fiber mortars by ANOVA

Authors : Mehmet Timur Cihan, Veysel Akyüncü

Pages : 580-587

Doi:10.28948/ngumuh.1558323

View : 48 | Download : 87

Publication Date : 2025-04-15

Article Type : Research Paper

Abstract :Using waste in the cement and concrete industry helps reduce costs and the need for large storage spaces for waste disposal. In particular, disposing of waste glass powder (WGP) from the glass industry requires significant storage capacity. Therefore, utilizing WGP as a raw material in construction is both an environmentally and economically viable solution. This study examined the workability, flexural strength, compressive strength, and splitting tensile strength of glass fiber-reinforced mortars containing WGP. A face-centered composite design was used to determine 13 test points. The fiber ratio was selected at 0%, 0.3%, and 0.6% by weight of the mixture, while WGP substitution levels were 0%, 7.5%, and 15% by weight of cement. The results indicate that adding glass fiber and WGP reduces flow value, flexural strength, compressive strength, and splitting tensile strength. However, at higher glass fiber ratios, the negative effect of WGP on flow value and compressive strength is less pronounced. The R2 values for flow value, flexural strength, compressive strength, and splitting tensile strength were 0.9983, 0.9586, 0.9069, and 0.8526, respectively, indicating a strong correlation between the tested parameters and the predictive model.
Keywords : Cam lifi, Atık cam tozu, Eğilmede çekme dayanımı, Basınç dayanımı, Yarmada çekme dayanımı, ANOVA, ANOVA, ANOVA, ANOVA, Yayılma değeri