Experimental, Mechanical Characterizations of Friction Welding of Steel and Aluminium Joints

Authors : Abderrazak ALLALI, Mouloud AISSANI, Nadir MESRATI, Boubaker OTHMANI, Mihoub MEDKOUR, Ishaak BOUKHADOUNI
Pages : 9-15
View : 49 | Download : 9
Publication Date : 2020-03-30
Article Type : Research Paper
Abstract :Rotary friction welding insert ignore into journalissuearticles values(RFW); is a solid-state joining process which works by rotating one workpiece relative to another while under a compressive axial force, which produces coalescence of materials workpieces. It is considered most viable alternative to overcome the difficulties faced in conventional joining techniques. As it is a solid state welding process, the process does not form molten pool thereby eliminating the solidification errors. It offers many advantages for some manufacturing sectors for a wide range of applications. In this research, we investigated the mechanical and metallurgical characteristics of RFW welded joints for homogenous and heterogeneous assemblies. We have studied A60 steels and 2017A series aluminum alloys. The obtained welds are similar in appearance in that they have several Microstructural distinct zones. So, the results show that by increasing the rotating speed employing 1000 and 1600 rpm, the mechanical properties during the RFW process is lightly improved, favored by the increase in heat flow. In the same specimen, the micro hardness distribution is generally viewed lightly changed between center line throw weld of welded tube and close to their boundary line. This is due to the no-uniform of temperature distribution in cross section. Thus, plastic deformation of heated portion of the metal plays an important role in friction welding process and their quality. Microstructural analysis reveals that grain growth in the joint WCZ and in heat affected zone HAZ because of the no-uniform of thermal flux distribution in both directions insert ignore into journalissuearticles values(transvers and longitudinal of tube);. Finally using RFW, the fabricators allow to perform and maintenance the mechanical components with low cost and which it conserves their welding quality compared to the classical fusion welding
Keywords : Rotary Friction Welding RFW, Plasticized Material, Heat Flux, Characterization, Microhardness

ORIGINAL ARTICLE URL