A comparative study on the estimation of ultimate bearing capacity of rock masses using finite element and limit equilibrium methods

Authors : Serdar Koltuk

Pages : 82-93

Doi:10.59313/jsr-a.1420333

View : 83 | Download : 98

Publication Date : 2024-03-31

Article Type : Research Paper

Abstract :Most rock masses are excellent foundation materials due to their bearing capacities of MPa. However, the ultimate bearing capacity of rock masses should be accurately estimated in the design of structures with high foundation loads. In this study, the ultimate bearing capacities of a strip footing built on rock masses with different geotechnical properties are determined using the finite element method (FEM) and the failure criterion of Hoek & Brown. The results of FE-analyses are compared to those obtained from the limit equilibrium methods (LEM) in the literature. It has been shown that the FEM with associated flow rule and Terzaghi`s limit equilibrium method give similar failure surfaces for most cases, and the ratio of ultimate bearing capacities determined according to the Terzaghi´s method to FEM varies between 1.5 and 4. In cases, in which the failure surfaces obtained from both methods differ, this ratio can rise up to 11.aring capacities determined according to the Terzaghi´s method to FEM varies between 1.5 and 4. In cases, in which the failure surfaces obtained from both methods differ, this ratio can rise up to 11.
Keywords : Ultimate Bearing Capacity, Rock Masses, Finite Element Method, Limit Equilibrium Method

ORIGINAL ARTICLE URL