FABRICATION AND WELDING OF ALUMINUM COMPOSITE

Home Page
About
Submit A Journal
Submit A Conference
Submit Paper/Book
- Submit a Preprint
- Submit a Book
Contact

The International Journal of Materials and Engineering Technology
Volume:5 Issue:2
FABRICATION AND WELDING OF ALUMINUM COMPOSITE

FABRICATION AND WELDING OF ALUMINUM COMPOSITE

Authors : Wafa MELİK, Zakaria BOUMERZOUG, Fabienne DELAUNOİS

Pages : 71-74

View : 49 | Download : 13

Publication Date : 2022-12-31

Article Type : Research Paper

Abstract :In recent years, aluminum alloy-based metal matrix composites insert ignore into journalissuearticles values(MMC); are gaining importance in several aerospace and automobile applications. Aluminum 6061 has been used as matrix material owing to its excellent mechanical properties coupled with good formability. In the present investigation Al6061–SiCp composites was fabricated by powder metallurgy route with 7.5 and 13 wt. % of SiCp and sintered at 600°C during 2 h. The synthesis samples were welded in solid state by bonding diffusion at 520 °C during 3 h. The effect of SiCp amount on structural and mechanical properties of welded joint of Al matrix was investigated. The main techniques of characterization were optical and scanning electronic microscopy, X ray diffraction, and hardness measurements. We have found the effect of silicon carbide quantity on the hardness of the synthesized composite. The microstructure observations showed a homogeneous distribution of SiCp on the welded joint
Keywords : Al matrix composite AMCs, Silicon carbide SiC, Powder metallurgy, Bonding diffusion, Welded joint

ORIGINAL ARTICLE URL

* There may have been changes in the journal, article,conference, book, preprint etc. informations. Therefore, it would be appropriate to follow the information on the official page of the source. The information here is shared for informational purposes. IAD is not responsible for incorrect or missing information.