SRF Based Output Voltage Control of 3-Level 3-Phase 4-Leg AT-NPC Inverter

Authors : Emre Avcı, Mehmet Uçar

Pages : 961-966

Doi:10.2339/politeknik.386964

View : 28 | Download : 12

Publication Date : 2018-12-01

Article Type : Research Paper

Abstract :This paper proposes a synchronous reference frame insert ignore into journalissuearticles values(SRF); based high performance output voltage controller for the 3-level 3-phase 4-leg insert ignore into journalissuearticles values(3P4L); advanced T-type neutral point clamped insert ignore into journalissuearticles values(AT-NPC); inverter operated in stand-alone mode. 3-phase inverters for stand-alone operation are required to provide 3-phase balanced nominal voltage under different load types such as unbalanced linear and non-linear loads. 3P4L inverters working with these types of load allow controlling zero sequence voltage by additional fourth leg. The main contribution of this work is the control of the 3-level 3P4L AT-NPC inverter with an LC-type filter modeled based on the output voltage and capacitor current feedback in the synchronous coordinate system. According to obtained capacitor current decoupled model, double loop PI controller is adopted to control the output voltage of the inverter. An inner capacitor current feedback loop is employed to provide fast dynamic response and active damping of the capacitor current. Finally, transient and steady state operation performance of the controller have been tested with PSIM simulation studies considering different load types. Simulation results validate that the proposed SRF based double loop PI controller ensure high dynamic response and high quality output voltage with less than 3% total harmonic distortion insert ignore into journalissuearticles values(THD); value for the 3-level 3P4L AT-NPC inverter.
Keywords : 3 level, 4 leg, AT NPC inverter, carrier based PWM, voltage control

ORIGINAL ARTICLE URL