Microstructural Evolution and Radon Emission Dynamics in Class F Fly Ash-Blended Cement Pastes

Home Page
About
Submit A Journal
Submit A Conference
Submit Paper/Book
- Submit a Preprint
- Submit a Book
Contact

Black Sea Journal of Engineering and Science
Cilt: 8 Sayı: 4
Microstructural Evolution and Radon Emission Dynamics in Class F Fly Ash-Blended Cement Pastes

Microstructural Evolution and Radon Emission Dynamics in Class F Fly Ash-Blended Cement Pastes

Authors : Ahmad Hosseinpour Sheikhrajab, Ahmet Erdal Osmanlioglu

Pages : 1195-1203

Doi:10.34248/bsengineering.1695365

View : 67 | Download : 83

Publication Date : 2025-07-15

Article Type : Research Paper

Abstract :Radon release from cementitious building materials is a major indoor air quality concern due to the presence of naturally occurring radionuclides in raw materials. This study investigates the influence of partially replacing Portland cement with Class F coal fly ash (0–50% by weight) on the pore structure and radon emission of hardened cement pastes. Cement paste specimens with varying fly ash content were analyzed using mercury intrusion porosimetry (MIP) to quantify porosity and pore size distribution, and an open-loop radon concentration setup (using a DURRIDGE RAD7 detector) to measure radon exhalation. The results reveal that increasing fly ash content leads to a pronounced increase in total porosity (from 14.23% at 0% fly ash to 20.22% at 50% replacement) and a corresponding rise in radon concentration (steady-state radon concentrations increasing from 20.8 Bq/m³ to 32.1 Bq/m³ for the same range). Microstructural analysis indicates that high fly ash substitution coarsens the pore network – the volume-based median pore diameter expanded from ~102 nm to ~381 nm – while also nearly doubling the internal surface area, reflecting the development of both larger capillary voids and fine pores. These changes suggest enhanced radon transport pathways at higher fly ash levels. The findings underscore a mechanistic link between fly ash-induced pore structure modifications and radon diffusion behavior. High-volume fly ash use, while beneficial for sustainability and reduced clinker usage, can thus inadvertently increase radon release. Therefore, optimizing the replacement ratio is essential to balance sustainability goals with indoor air quality considerations and to minimize potential health risks associated with indoor radon exposure.
Keywords : Radon emission, Fly ash, Cement paste, Microstructure, Porosity, Sustainability

ORIGINAL ARTICLE URL

* There may have been changes in the journal, article,conference, book, preprint etc. informations. Therefore, it would be appropriate to follow the information on the official page of the source. The information here is shared for informational purposes. IAD is not responsible for incorrect or missing information.