IAD Index of Academic Documents
  • Home Page
  • About
    • About Izmir Academy Association
    • About IAD Index
    • IAD Team
    • IAD Logos and Links
    • Policies
    • Contact
  • Submit A Journal
  • Submit A Conference
  • Submit Paper/Book
    • Submit a Preprint
    • Submit a Book
  • Contact
  • International Journal of Chemistry and Technology
  • Volume:7 Issue:1
  • Production and characterization of polyamide-6 (PA6) and cellulose acetate (CA) based nanofiber memb...

Production and characterization of polyamide-6 (PA6) and cellulose acetate (CA) based nanofiber membranes by electrospinning method

Authors : Abdullah GÜL, İsmail TİYEK
Pages : 91-101
Doi:10.32571/ijct.1207544
View : 133 | Download : 81
Publication Date : 2023-06-30
Article Type : Research Paper
Abstract :Recently, one of the most important nanotechnology products developed is nanostructured membranes. This study aims to produce nanofiber membranes to be used as filter material by electrospinning method from Polyamide-6 insert ignore into journalissuearticles values(PA6);/Cellulose Acetate insert ignore into journalissuearticles values(CA); polymer mixtures prepared in different mixing ratios insert ignore into journalissuearticles values(100/0, 90/10, 80/20, 70/30, 60/40, 50/50);. In the study, firstly, preliminary experiments were carried out to determine the optimum electrospinning process parameters for the production of nanofiber membranes from these PA6/CA polymer mixtures. Then, solutions were prepared from these polymer mixtures and nanofiber membranes were produced from these prepared solutions by electrospinning method. Finally; density, electrical conductivity and viscosity measurements of PA6/CA solutions and FTIR, SEM, thickness and strength tests of nanofiber membranes were performed. In addition, the average nanofiber diameters of membranes were calculated. It has been determined that the average diameter of the nanofibers in the structure of membranes produced by electrospinning method is between 150 – 300 nm. From the characteristic peak bands obtained as a result of the FTIR analysis, it was determined that the PA6/CA structure was intact in the nanofiber material. In addition, it was determined that smooth and very fine nanofibers were formed in the materials produced from SEM images. It was observed that the conductivity of the solution decreased with the increase of the CA mixing ratio in the PA6/CA polymer solution and accordingly the fiber diameter became thinner
Keywords : Nanofiber, Membrane, Electrospinning, Polyamide 6, Cellulose Acetate

ORIGINAL ARTICLE URL

* There may have been changes in the journal, article,conference, book, preprint etc. informations. Therefore, it would be appropriate to follow the information on the official page of the source. The information here is shared for informational purposes. IAD is not responsible for incorrect or missing information.


Index of Academic Documents
İzmir Academy Association
CopyRight © 2023-2026