Comparison of Mechanical Properties of Samples Fabricated by Stereolithography and Fused Deposition Modelling

Authors : Mehmet Said Bayraklilar, Melih Kuncan, Abdulkadir Buldu, Muhammed Tayyip Koçak, Osman Ülkir

Pages : 475-491

Doi:10.55546/jmm.1358963

View : 91 | Download : 94

Publication Date : 2023-12-26

Article Type : Research Paper

Abstract :Additive manufacturing (AM) technology has attracted significant attention with the rapid fabri-cation of 3D parts for various applications. With fused deposition modeling (FDM) and stereo-lithography (SLA), the most used methods in this technology, it is possible to produce functional parts with complex shapes quickly and cheaply. Determining the mechanical properties of the parts produced by these methods is important in terms of efficient operation in the relevant fields. This study, 45 test specimens were fabricated using three different polymer materials (UVR, PLA, and ABS) in SLA and FDM type 3D printers, including tensile, compression, and 3-point bending tests. Samples are printed at a 75% fill rate according to ASTM standards. Experimental studies were carried out to determine the mechanical properties of the samples. Among the samples, the highest strength values in tensile, compression and bending test samples made of UVR material were 60.39 MPa, 127.74 MPa and 118.35 MPa, respectively. In addition to mechanical properties, hardness, and SEM analyses were performed to examine the surface roughness, surface topography, and composition of the samples. As a result, the effects on the mechanical properties of the samples fabricated by the UVR-based SLA method and the PLA-ABS-based FDM method were examined and compared.
Keywords : Eklemeli imalat, Sıkıştırma testi, Erimiş biriktirme modellemesi, Stereolitografi, Çekme testi, 3 Nokta Eğme Testi