Investigation of the fuel properties of biodiesel produced over an alumina-based solid catalyst

Authors : Nezahat BOZ, Miray KARA, Oylum SUNAL

Pages : 433-442

View : 28 | Download : 7

Publication Date : 0000-00-00

Article Type : Research Paper

Abstract :The present study investigated the transesterification process used in the production of canola oil methyl ester from canola oil and methanol over synthesized KF/Al2O3 catalysts. Different amounts of KF solution insert ignore into journalissuearticles values(15-65 wt. %); were impregnated into alumina. Loading 35 wt. % of KF into an alumina insert ignore into journalissuearticles values(35% KF/Al2O3); catalyst gave the maximum yield of 99.6% under the following reaction conditions: 60 °C, 8-h reaction time, 15:1 molar ratio of methanol/canola oil, and 3 wt. % of catalyst. The fuel properties of canola oil methyl ester were tested, including ester content, density, viscosity, flash point, copper strip corrosion, total and free glycerol, acid value, distillation temperatures, pour point, freezing point, and calculated cetane index. The calculated cetane index was 62.8. The pour point insert ignore into journalissuearticles values(-10 °C); and freezing point insert ignore into journalissuearticles values(-12.9 °C); were lower than those of No. 2 diesel fuel. The results show that the produced canola oil methyl ester can safely be used as an alternative diesel fuel.
Keywords : Biodiesel, fuel properties, transesterification, heterogeneous basic catalyst