Optimization of Process Parameters for Reactive Lactic Acid Extraction

Authors : E KAHYA, E BAYRAKTAR, Ü MEHMETOĞLU

Pages : 223-230

View : 18 | Download : 6

Publication Date : 0000-00-00

Article Type : Research Paper

Abstract :The reactive extraction method was used to separate lactic acid from its aqueous solutions. In this method, the amine in the solvent phase reacts with the lactic acid in the aqueous phase, resulting in the extraction of acid into the organic phase. In this study, Alamine 336 diluted with oleyl alcohol was used as the solvent. The effects of initial lactic acid concentration, pH, temperature, extraction time, stirring rate, the amount of Alamine 336 in oleyl alcohol and the ratio of organic phase volume to aqueous phase volume, Vorg/Vaq, on the distribution coefficient of the lactic acid, KD, were investigated. KD increased with increasing stirring rate, extraction time and amount of Alamine 336 and Vorg/Vaq, and decreased with increasing temperature and initial lactic acid concentration. Optimum conditions for reactive extraction of the lactic acid were determined by using the Linear Box-Wilson experimental design method. The optimum conditions were found as follows: initial lactic acid concentration: 21 g/L, pH: 2.0, temperature: 32 o C, stirring rate: 120 rpm, amount of Alamine 336 in oleyl alcohol: 41% and Vorg/Vaq:1/1.
Keywords : Reactive extraction, lactic acid, separation of lactic acid, amine extraction, two phase system, Box Wilson method