BET, FTIR, and RAMAN characterizations of activated carbon from waste oil fly ash

Authors : Rızwan ALI, Zaheer ASLAM, Reyad A SHAWABKEH, Anam ASGHAR, Ibnelwaleed A HUSSEIN

Pages : 279-295

Doi:10.3906/kim-1909-20

View : 20 | Download : 14

Publication Date : 0000-00-00

Article Type : Research Paper

Abstract :Activated carbon AC , a porous material with high pore volume, attracts increasing attention owing to its potential applications in several fields. The development of a porous structure in AC marginally relies on both the treatment methods and the type of precursor. Thus far, both renewable and nonrenewable precursor sources have been used to synthesize AC with high surface area and pore volume. This study presents the synthesis of AC via physicochemical treatment of waste oil fly ash OFA , a waste material produced from power plants. The aim was to produce AC by adding surface pores and surface functional groups to the basal plane of OFA. Toward this objective, OFA was first chemically leached/activated with various combinations of H2SO4 and H3PO4, and then physically activated with CO$_{2}$ at 900 °C. The chemical activation step, synergistically combined wit CO$_{2}$ activation, resulted in an increase of 24 times the specific surface area of the OFA. The maximum increase in surface area was obtained for the sample physicochemically treated with 100% H$_{2}$ SO$_{4}$. Moreover, the spectroscopic analysis confirmed the presence of acid functional groups after the chemical treatment step. To explore the surface heterogeneity, adsorptive potential distribution in terms of surface energy was also discussed as a function of the surface coverage. Following chemical activation, the OFA surface became heterogeneous. A major portion of the AC showed surface energy in the range of 40-50 erg/K, which was further increased as a result of physical activation at a higher temperature. Thus, the synergism created by physicochemical activation resulted in a material with high surface area and pore volume, and excellent adsorption characteristics. From the findings of this study, it was concluded that OFA is a cost-effective and environmentally benign precursor for the synthesis of AC.
Keywords : Activated carbon, oil fly ash, physicochemical activation, surface energy, waste utilization