Position Control of Slider-Crank Mechanism

Authors : Muhammet AYDIN

Pages : 158-162

Doi:10.31590/ejosat.1184248

View : 22 | Download : 14

Publication Date : 2022-10-31

Article Type : Research Paper

Abstract :This paper presents the position control of the slider-crank mechanism in the simulation environment. The slider-crank mechanism was first 3D modeled in the Solidworks environment. This model was afterwards converted to xml format. The slider-crank mechanism\`s simulink blocks were made using the xml file from the Matlab model, which allowed the 3D model to be imported into Matlab. These Simulink blocks were used to implement the PID control approach for angle control of the model\`s input limb. In order to achieve this purpose, additional blocks required from the simulink have been added to other existing blocks. It has been determined that the mechanism\`s target reference point rotates 90 degrees in 0.01367 seconds. It was discovered that the error value was 0.03114. It is evident from the results that the mechanism\`s PID control method allows for quick position control with a very tiny margin of error. Solidworks is a program that may be used to create the final design of the slider-crank mechanism that will be created using this method. By deciding on the material that will be used to make the mechanism, it is simpler to achieve adequate control coefficients for practical applications when the same operations are repeated. This will free up time for additional study.
Keywords : Konum kontrolü, Krank Biyel, Mekanizma kontrolü, Simmecanics, Modelleme